Accesories

Wall Sleeves and Drain Kits

Polymer Non Insulated Wall Sleeve

Polymer Non Insulated Wall Sleeve

42" x 16" x 14"

The universal non insulated polymer wall sleeve utilizes fiberglass reinforced polyester compound to produce a durable, non-corrosive wall case for PTAC.

For applications where weather conditions could influence sleeve sweating, a condition that can occur when the outside temperature is cold and the indoor conditions are warm and humid, the Insulated Polymer Wall Sleeve (or Wall Sleeve Insulation Kit) should be considered.

Part No. WALL-SLEEVE-1PK

Polymer Non Insulated Wall Sleeve

Polymer Insulated Wall Sleeve

42" x 16" x 14"

The universal insulated polymer wall sleeve utilizes fiberglass reinforced polyester compound, plus factory installed insulation. Producing a durable, non-corrosive wall case that provides superior sound absorption, reduces heat loss and prevents sleeve sweating, a condition that can occur when the outside temperature is cold and the indoor conditions are warm and humid.

Part No. SLEEVE-INSUL-1PK

Polymer Non Insulated Wall Sleeve

Metal Extended Insulated Wall Sleeve

This extended width wall sleeve is fully insulated and made of galvanized steel. It is welded and protected with armor tough powder coat paint. Welded areas are protected with a sealing compound to prevent rust. Choose from 18 in., 24 in., or 26 in. standard depth sizes.

Part No. SLEEVE-EXT18-1PK (18 inches)
Part No. SLEEVE-EXT24-1PK (24 inches)
Part No. SLEEVE-EXT26-1PK (26 inches)

Polymer Non Insulated Wall Sleeve

Wall Sleeve Insulation Kit

This easy to field install insulation kit for 42" x 16" x 14" wall sleeves provides sound absorption, reduces heat loss and prevents sleeve sweating.

Part No. INSULATION-KIT

Polymer Non Insulated Wall Sleeve

Internal/External Drain Kit

Condensate drain kit can be used to control condensate water from the packaged terminal unit. The kits can be used for exterior or interior drain systems. The drain kit includes 1/2" O.D. Copper drain tubes with a short right angle tube and a 6" long straight tube to suit the application.

Part No. DRAIN-KIT-4PK

Polymer Non Insulated Wall Sleeve

Friedrich Wall Sleeve Adapter

Friedrich wall sleeve extension for retrofit into older Friedrich 11-1/2 in. deep wall sleeves (Friedrich T Series).

Part No. FR-SLEEVE-EXT

Polymer Non Insulated Wall Sleeve

Wall Sleeve Molding Kit

For a superior look and to hide any construction imperfections, use this wall sleeve molding kit to trim the wall sleeve to the wall. The molding kit is a perfect solution and can be used with any First America wall sleeve (matches wall sleeve color).

Part No. SLEEVE-MOLDING

Outdoor Rear Grilles & Baffle Kits

Polymer Non Insulated Wall Sleeve

Stamped Aluminum Exterior Rear Grille

42" x 16"

This cost effective, one piece stamped grille is made from durable anodized aluminum. The grille is lightweight, has a clear finish, and is easy to install from inside the room.

Part No. GRILLE-ALU-STAMP

Polymer Non Insulated Wall Sleeve

Aluminum Architectural Rear Grille

42" x 16"

The extruded aluminum outdoor grille will enhance the appearance of any building. The grilles are made of a durable, extruded, anodized aluminum.
*Custom colors and sizes available.

Part No. GRILLE-ALU-CLEAR
Part No. GRILLE-ALU-BEIGE
Part No. GRILLE-ALU-BROWN
Part No. GRILLE-ALU-WHITE
Part No. GRILLE-ALU-BRONZ

Subbases and Kits

Polymer Non Insulated Wall Sleeve

Non-Electrical Standard Sub-Base

The non-electrical sub-base is made of heavy gauge steel to provide support for the wall sleeve. The subbase is designed to mount directly to the wall sleeve and contains adjustable legs from 3-1/4 in. to 5-1/2 in. for leveling.

Part No. SUBBASE-NON-ELEC

Polymer Non Insulated Wall Sleeve

Electrical Standard Sub-Base

The electrical subbase provides the same features as the non-electrical subbase, plus a factory installed electrical junction box containing a receptacle for corded packaged terminal air conditioner (PTAC) units. The electrical subbase offers models from 208/230v, 15, 20 and 30 amps and 265v, 15, 20 and 30 amps.

Part No. SUBBASE-230V-15A
Part No. SUBBASE-230V-20A
Part No. SUBBASE-230V-30A
Part No. SUBBASE-265V-15A
Part No. SUBBASE-265V-20A
Part No. SUBBASE-265V-30A

Polymer Non Insulated Wall Sleeve

Leveling Legs

Leveling legs attach easily to the wall sleeve and offer accurate leveling and support for units without a subbase. Leveling legs are adjustable from 3-1/4 in. to 5-1/2 in.

Part No. LEVELING-LEGS

Polymer Non Insulated Wall Sleeve

Subbase Fuse Kit

The fuse kit provides in-line over-current protection at the unit when required by NEC (National Electrical Code) or local codes.

Part No. SUBBASE-FUSE-15A
Part No. SUBBASE-FUSE-20A
Part No. SUBBASE-FUSE-30A

Polymer Non Insulated Wall Sleeve

Subbase Disconnect Switch

The subbase power disconnect 2-pole switch provides a recessed power disconnect for the PTAC unit when required by NEC ("National Electrical Code") or local codes.

Part No. SUBBASE-SWITCH